Valves & Riser Equipment


Please find below a list of all currently available valves & dry riser equipment in our scope of supply ... New models/types are being designed, manufactured and tested regularly.

Kindly check for future updates. Should you require any assistance, please do not hesitate to contact a member of our staff. Thank you.

Dividing/Collecting Y-Breeching


Model Style 283, our high quality dividing Y-breeching, with red RAL3000 finish.

  • Used to split a single feed water supply into two
  • The Inlet is one male instantaneous and outlet is two female instantaneous to suit standard instantaneous couplings
  • The female outlets are fitted with a single twist release knob
  • Material of Construction : Aluminium Alloy (BS1490)
  • Designed with WP 15 bar (218psi)
  • Size : 2 1/2" (65NB)

2-way and 4-way Breeching Inlet


Our high quality inlet breeching, conform to BS:5041, either have 2x, 3x or 4x gunmetal 21/2" male instantaneous inlets conform to BS336, fitted with non-return valves, complete with either 2x, 3x or 4x rubber blank caps & chains.

Finish :

  • 2 coats of red oxide primer
  • 2 coats of red aniti-corrosive PO paint
  • Designed with WP 150psi, hydro tested at 325psi.

Models :

  • FIB-2 (two way inlet breeching)
  • FIB-4 (four way inlet breeching)

Flanged Outlets for example can be :

  • 150mm ID & 280mm OD, 240mm PCD with 8x 22mm diameter bolt holes, complete with a gunmetal 25mm size drain-valve for the 4-way model FIB-4.
  • 100mm ID & 220mm OD, 180mm PCD with 8x 19mm diameter bolt holes, complete with a gunmetal 25mm size drain-valve for the 2-way model FIB-2.

Blank Caps & Adaptors


Currently available materials manufactured in-house are :

  • Brass BS female instantaneous x female screw threaded adaptors 2 1/2" (65mm - BSPT)
  • Alu Alloy BS male instantaneous x male screw thread adaptor 2 1/2" (65mm - BSPT & NHT)
  • Alu Alloy or ABS BS instantaneous male cap
  • Alu Alloy BS336 hose coupling 1 1/2", 2" and 2 1/2" (40, 50 & 65mm)
  • Designed with WP 15 bar (218psi)
  • Size : 2 1/2" (65NB)

When ordering adaptors, type of thread (NPT, NST or BSP) and diameter (1½”, 2”, 2½”) must be specified.

In order to acces the technical data sheet section, pls Register